• How to encode a live stream using OBS studio?

  This article explains how to encode live streaming using OBS studio with 5centsCDN. The first step is to download and install the OBS studio in your system. To enable live streaming, Click here to watch the videoPopular

• Audio/Video SYNC issue with FMLE

  Audio/Video SYNC Issue Open a new subscriber and verify that the problem occurs. Ensure that the CPU usage of the encoding computer and the subscriber computer is not more than 75%. Ensure that the buffer length of the subscriber is a non-zero value. A low frame rate can create a perception that video and audio are out of sync. Try encoding at a higher frame rate.Few readers

• How to use Flash Media Live Encoder?

  Learn how to configure FMLE to start live streaming You can refer below mentioned GIF for the FMLE configuration.Few readers

• Audio/Video SYNC issue with FMLE?

  Open a new subscriber and verify that the problem occurs. Ensure that the CPU usage of the encoding computer and the subscriber computer is not more than 75%. Ensure that the buffer length of the subscriber is a non-zero value. A low frame rate can create a perception that video and audio are out of sync. Try encoding at a higher frame rate.Few readers

• A quick test for Audio/Video SYNC Issue with FMLE?

  Audio/Video sync issue is common, it is mainly due to encoding hardware or software level. Now the question is how to test and make sure it is encoding hardware or software level issue or to determine it is the client side issue? FMLE has an option to record the live stream on your local encoding system, we can easily analyze the issue once the video file recorded on your local system. How to determine and lock the issue? The file recorded on your encoding has nothing to do with the CDN seFew readers

• I am not able to start the encoder with FMLE, what should I do now?

  Verify whether FMS URL and Stream Name are entered correctly in the Flash Media Live Encoder. Make sure the Internet is proper and have enough bandwidth. If the issue still persists feel free to contact the support.Few readers

• Why is my capture device not listed in the device drop-down list with FMLE?

  Verify that the device is listed in the Device Manager and the device drivers are properly installed. Also, make sure that the device supports DirectShow.Few readers

• I am getting an error message that states “DEVICE IN USE.” in FMLE what should I do?

  First, make sure no other application is using the device. Then, try the following: Exit Flash Media Live Encoder. Exit the device(Ex: Splitcam, Manycam..etc). Restart Flash Media Live Encoder and ensure the Video and Audio checkboxes in the Encoding Options panel are selected. Flash Media Live Encoder searches for a compatible device. Your device should then appear in the Device list.Few readers

• Why my audio is not working in FMLE?

  It may be due to improper selection of audio device in the Flash Media Live Encoder. It may be due to the problem with the audio driver, please check whether the driver properly installed in the encoding server. In the case of WebLive TV please select ‘stereo mix’ in audio driver properties In the Flash Media Live Encoder. If you are using TV capture card please ensure the audio is connected in the ‘Line In’ jack of the system as well as the selection in the Flash Media Live encoderFew readers

• FMLE automatically stopping in every 30 seconds after installing AAC CODEC (MAINCONCEPT)?

  It is due to the AAC codec (MainConcept) installed in the encoding server. AAC codec (MainConcept) installed is a demo version. Please purchase the full version from http://www.mainconcept.com/.Few readers

• Encoder failed to connect to RTMP server

  This article helps you to set up a live stream from your encoder. If you are getting an error while connecting to RTMP URL then check the below-mentioned steps. Check the ping result to the origin server (eg: ping IP address). Check the traceroute result to the origin server. RTMP URL typo. RTMP URL any spaces in the URL. Verify the RTMP URL and stream key. Check PC CPU usage or load. Check PC memory. If you find any issue in the above steps then please contact your internet seFew readers

• Why can’t I connect to ORIGIN Server with FMLE?

  Verify that the encoding computer is connected to the network. Verify that the connection URL to the origin server is correct. Contact support and verify if publishing point and the network is intact.Few readers

• How to play F4V file with FMLE?

  How to play F4V file? The trick to play F4V file is simple, follow the below steps: 1.Record the file is FMLE using the following settings: 2.Start the FMLE, the f4v file will be saved in the specified path or by default it is saved in My Documents My Videos 3.Download f4vpostprocessor10.zip from the download section or from Adobe, http://www.adobe.com/productFew readers